Chat with us, powered by LiveChat

Hydraulic, Gas and Propane Powered Post Drivers, Pullers, Caps, Steps

Post Drivers

Air Operated Post Driver Model PD-55

Lightweight and portable, ideal for use anywhere, this driver has a low air consumption rate.  Designed to be used by one person, the Model PD-55 Pneumatic Post Driver delivers up to 1700 blows per minute.

A reciprocating piston, the only moving part, strikes directly on the post or driving adaptor.  The user needs 42 cfm, a filter-regulator-lubricator to assure clean air, 90 psi and ten drops of oil per minute.  The PD-55 is capable of driving U-Channel posts, round and square posts, stakes, or any shape post up to 3 7/8″ diameter.

Special adaptors are available for guard rail posts.

NOTE – A complete unit consists of the following:
  • PD-55 Driver (66 lbs.)
  • Throttle Valve Kit (6 lbs.)
  • Filter-Regulator-Lubricator (6 lbs.)
  • Carrier for Filter-Regulator-Lubricator (12 lbs.)
  • 16-Foot Air Hose (7 lbs.)
  • PD-55 Channel Post Adaptor (9 lbs.) – Optional

Choice of U-Channel, Square or Round.

Other Options: The proper air operated post driver can greatly increase your productivity.

Here is a list of available post drivers.


  • PD-39 Post Driver – Light Weight Medium Duty (40 lbs.)
  • PD-39P Panel Post Driver – Light Weight Medium Duty (41 lbs.)
  • PD-45 Post Driver – Light Duty (46 lbs.)
  • PD-55 Post Driver – Medium Duty (66 lbs.)
  • PD-110 Post Driver – Medium/Heavy Duty (107 lbs.)
  • PD-140 Post Driver – Heavy Duty (140 lbs.)

Post Drivers

Engine Driven Post Driver Model G23


This ultra heavy duty, 48 lb. driver has the following features: simple starting two-cycle engine, idle feature with clutch (means easy leveling without stopping engine), choice of engine manufacturer, highest hitting force available, few moving parts, anti-vibration handles, air cushion dampening, uses regular two-cycle oil for lubrication, fuel efficiency (0.25 U.S. G.P.H.), lean oil mix, 25:1-2 cycle fuel mixture, 40.2 cc engine displacement, centrifugal clutch, 1200 B.P.M. impact rate, and it can be used with or without adapters, to fit any post. The G23 is guaranteed for two years, and for life on key parts.

NOTE: We also have the G30 4-cycle OHV engine post driver. 


Tippman Propane Powered Hammer Post Driver

Weighing only 43 lbs. and powered by a standard 14.9 oz. propane tank, this sign post driver is the most convenient, user friendly way to drive posts that you could ever imagine.  The Tippmann Propane Hammer will drive posts into hard, dry, frozen or even rocky soil. Requiring only one person to operate, you can deliver up to 150 blows per min. at approximately 65ft. lbs. of driving force per blow.


  • Full line of Adapters
  • Approx. 10,000 Cycles per Tank
  • 100% self contained

Post Pullers

Hydraulic Post Puller Model PL-3

PL-3wThe 53 lb., 36 3/4″ high, hand-held portable Model PL-3 Post Puller is completely self-contained and is easily manageable by one person.

Its hydraulic pump produces over three tons of pressure to easily pull up posts up to 4″ x 6″.  It takes only two minutes to pull a post three feet deep.

How does it work? A chain or pulling device is placed around the post and the puller is positioned with the post between its feet.  The hydraulic cylinder is collapsed, the hook removed from its carrying position and attached to the chain around the post and the safety restraint.  The hydraulic valve is closed and the post is pulled.  The safety restraint is removed after the post starts moving.  After pulling the post, the PL-3 is returned to its carrying configuration.

Hydraulic Post Puller Model P600

This 51 lb., 18″ x 18″ x 20″ heavy-duty post puller has two high-travel cylinders which provide 19″ of stroke and has 6 tons of pulling power.


  • Patented design applies force in line with the post.
  • Adjusts for uneven ground.
  • Wide stance prevents sinking.
  • 1 1/2″ to 2″ of travel per pump.
  • 2 qty. – 8″ air-filled tires.
  • Comes complete with 8-ton proof rated chain.