Sign Brackets
Garden State Highway Products, has all your necessary sign brackets to hang your outdoor signs securely including mast arm hardware.
K6 or K9
- Blade Holder Length: 6” and 9”
- Blade Type: flat/extruded (shims required when using flat SNS – sold separately)
- Mounted with banding
- Signs must be punched for mounting
Chevron Bracket
- Aluminum bracket secures two chevron signs to a single post
- CAB1 holds 12” x 18” or 18” x 24” signs
- CAB2 holds 18” x 24” or 24” x 30” signs
- CAB3 holds 24” x 30” or 30” x 36” signs
Cantilever Wing Bracket
- Blade holder lengths: 16”, 24”, 30” and 36”
- Blade type: flat/extruded
- Mount on wall or any post with banding
Aluminum Interlocking Bracket Sets
- Z-238 secures one traffic control sign to 2-3/8” O.D.
- BB-832 secures two traffic control signs facing opposite directions to 2-3/8” O.D. round post
- Vandal-resistant hardware is available on request
- Z-300 for 3” O.D., Z-400 for 4” O.D. round posts
Wing Bracket for Flat or Extruded Signs
- Bracket dimensions: 5”H x 2”W
- Hardware included: (2) 5/16” standard set screws
- The wing bracket is not compatible with bolt-through installations
- Mount to post or wall with 3/4” banding, bolts, or lag screws (not included)
Bell Wing Bracket
- WB12 12”, WB18 18”, WB24 24”
- Wing bracket can be banded or bolted to a wall or pole
Mast Arm Hardware
The brackets in this section are designed to handle single- or double-sided signs from any diameter overhead support. All sign-mounting hardware is included with these brackets.
GS-OH-ADJ Adjustable-Length Safety Swing Bracket
- 16-3/4” fully closed / 20-1/2” fully extended
- 6”, 12”, or 18” are available extensions
GS-OH-FX Fixed-Length Safety Swing Bracket
- 7-3/4” Length
COM-88
- For Mast Arms
- Heavy duty steel plated and aluminum overhead sign mounting bracket
- Swivel to any angle
- Can be used for any size sign
COM-77
- For 1/4” – 3/8” overhead cables
- Heavy duty steel plated and aluminum overhead sign mounting bracket
- Swivel to any angle
- Can be used for any size sign
GS-OH-OFS Offset Safety Swing Bracket
- Consists of:
— One pelco bracket
— Two sliders
— Two swivels
— One tube