Protecting and securing your signage with appropriate hardware is essential.
Choose from a complete section of stainless steel and aluminum hardware sets, sign bases, post couplings, sign brackets, anchors, bolts, mounting wrenches and everything else you may need to get your sign installed. Regardless of your safety message, you’ll need options for sign hardware.
Whether you’re ordering a stock or custom sign, provide mounting information at time of quote so accurate hole placement are drilled onto your sign. Choose from standard hardware sets, fence signs holder brackets, magnetic tape strips, or breakaway nuts to securely hold your safety message.
Hex Bolt
- Size: 0.625”, 0.875”, 1.75”, 2”, 2.5”, 3” & 4”
- Material: Steel, Stainless Steel, Aluminum and zinc coated
- Bolt and nut sold separately
Bolt with Standard Slotted Head
- Size: 0.1875”, 1.5” & 2.5”
Hex Nut
- Size: 0.1875”, 0.3125”& .5”
- Material: Steel, zinc coated
- Bolt and nut sold separately
Lock Nut
- Size: 0.3125”-18
- Material: Steel, zinc coated
Flat Nylon Washer
- Size: 0.3125””x0.375”
- Material: Nylon, steel plated
Flat Washer
- Size: 0.3125”-18x.083”
- Material: Nylon, steel plated, zinc coated
Lock Washer
- Size: 0.3125”-18x.078”
- Material: Steel, zinc coated
Socket Set Screw
- Size: 0.3125”, .5” & 0.375”
- Material: Steel, heat treated
- Knurled point
- Zinc plated
- Requires standard allan key or T100 Installation tool
Sign Saver Round
- 3.5” round circle
- Non-ribbed, flat aluminum with 0.3125” hole
- Mount between sign and post to reinforce signs where holes are punches
Sign Saver Round
- 4” square
- Non-ribbed, flat aluminum
- One 0.375” center hole
- Mount between sign and post to reinforce signs where holes are punched
Sign Save2 Large
- 4”x5” large or 3”x3” small backing plate
- Mount between signs and posts to reinforce Signs
- Formed aluminum with stamped ribs to prevent twisting
- Helps prevent warping an buckling
SignGrabber
- SignGrabber SG2 is a galvanized cast metal mounting bracket
- 2.5” squarex.75” deep
- Supplied with 1.3125””x.75” tamper proof bolt and nut
- A tamper-resistant hardware system
- Fastens sign panels to U-Channel or square steel sign posts with regular spaced holes, or sign panels and banners to standard steel or fabric chain link fencing
SignGrabber for U-Channel Posts
- Used with the .75” or 2” tamper resistant bolts for mounting signs to poles