Traffic & Zone Marking Paint

Whatever your traffic marking material needs are, Garden State Highway Products, Inc. (GSHP) has the right product for your application — from rural roads to congested urban intersections, our materials are carefully designed and manufactured to ensure optimal performance and safety.

Our pavement striping paints are available in oil base, water base and fast-dry. Aerosol paints are available in a wide range of colors and our bulk paints are available in one-gallon to 250-gallon tote containers. GSHP paints are manufactured to the latest low VOC and environmental standards and are ideal for parking lots, streets and highways, airport runways, taxi ways, hold areas and warehouse floors.

Traffic & Zone Marking

Athletic Field Marking

Aerosol Paint

Stencils

Traffic & Zone Marking

HydrophastWaterborne Traffic Paint

Lead free, VOC compliant, fast drying, 100% acrylic waterborne traffic paint. Conforms to Federal Specification TT-P-1952E Type I & II as well as many state & federal specifications. For use on bituminous, Portland-cement, concrete pavements and various sealcoat applications. Not recommended for use on concrete sealers containing silicone.

Surface Condition & Preparation

Asphalt and concrete surfaces should be cured, clean, dry, and sound. Loose and lifting paint should be removed prior to application. Concrete with sealers containing silicone, having a smooth finish, or efflorescence should be treated by etching or abrasive blasting, as these conditions may interfere with adhesion. When the product must be applied on new asphalt, apply two thin coats 7-8 mils each, allowing 24 hours between coats is recommended to help minimize cracking and lifting. While new asphalt surfaces vary in length of time required for cure, one to two weeks is usually adequate for the application of waterborne paints. Waterborne paints applied too thick or too soon may cause asphalt to lift and or crack. Regardless of surface condition, a test stripe should be placed inconspicuously to determine if surface is suitable before continuing.

Application

Formulated for use with either airless or conventional air atomized spray equipment. See equipment manufacturer’s recommendations. Recommended paint thickness is 15 mils wet. For best results apply when air and surface temperatures are above 50°F and relative humidity is below 85%. To improve spraying, paint may be heated to an optimum temperature of 110°F, never exceed 160° F. Heating waterborne paint will not accelerate dry time.

Thinning & Cleaning

Thinning is not recommended. If thinning is desired, use clean water, do not exceed 1 pint of water per 5 gallons of paint. Adding water will increase dry time. Wet paint may be cleaned with water. Dried paint is very difficult to remove.

Shelf Life

Twelve (12) months minimum in an unopened container stored @ 77ºF.

Storage

Store in a cool dry area. KEEP FROM FREEZING.

Current Stock Colors

White, Yellow, White Premium, Yellow Premium, Green, Black, Blue, Red, Brick Red

Available in 5 gallon pails, 50-55 gallon drums or 250-275 gallon totes.

Call for pricing or request information.

Hydrophast PLUS+ Waterborne Traffic Paint

Hydrophast™ PLUS+ is a lead free, VOC compliant fast drying, extremely durable,100% acrylic waterborne traffic paint. For use on bituminous, Portland-cement and concrete pavements, as well as various sealcoat applications. May be applied with conventional or airless sprayers.

Current Stock Colors

White, Yellow, Green, Black, Blue, Red, Brick Red

Available in 5 gallon pails, 50-55 gallon drums or 250-275 gallon totes.

FAA Compliant Colors

White, Yellow, Green, Black, Red

Available in 5 gallon pails, 50-55 gallon drums or 250-275 gallon totes.
Call for pricing or request information.

Chlorinated Rubber

A durable fast drying alkyd traffic paint modified with chlorinated rubber. Conforms to current VOC (Volatile Organic Compounds) regulations as well as NH cold weather specifications. For use on bituminous, Portland-Cement and concrete pavements. Not recommended for use over concrete sealers containing silicone or asphalt sealers.

Surface Condition & Preparation

Asphalt and concrete surfaces should be cured, clean, dry, and sound. Loose and lifting paint should be removed prior to application. Concrete with sealers containing silicone, having a smooth finish, or efflorescence should be removed by etching or abrasive blasting, as these conditions may interfere with adhesion. While new asphalt surfaces vary in length of time required for curing, insufficient curing may result in bleeding. New concrete tends to chalk; alkyd may also react with the alkali in new concrete making adhesion difficult. Regardless of surface condition, a test stripe should be placed inconspicuously to determine if surface is suitable before continuing.

Application

Formulated for use with either airless or conventional air atomized spray equipment. See equipment manufacturer’s recommendations. Recommended paint thickness is 15 mils wet. For best results apply when air and surface temperature are above 40°F and relative humidity is below 85%.

Thinning & Cleaning

Federal and state regulations prohibit dilution of this product. DO NOT THIN.
Toluene may be used for cleaning.

Shelf Life

Three (3) months minimum in an unopened container stored @ 77ºF. It is recommended to order only what you are able to use in this time frame.

Storage

Store in a cool dry area.

Current Stock Colors

White, Yellow, Green, Blue, Black, Red

Call for pricing or request information.

Turbo Dry Low VOC Acetone Traffic Paint

A durable fast drying acrylic/alkyd traffic paint. No pick up in as fast as 3 minutes at 70° F and 42% humidity. Conforms to current federal VOC regulations as well as newer lower state VOC limits of 100 g/L. Recommended for use on bituminous, Portland-cement and concrete pavements. Not recommended for use over concrete sealers containing silicone or asphalt sealers.

Surface Condition & Preparation

Asphalt and concrete surfaces should be cured, clean, dry, and sound. Loose and lifting paint should be removed prior to application. Concrete sealers containing silicone, have a smooth finish or efflorescence should be removed by etching or abrasive blasting, it may interfere with adhesion. While new asphalt surfaces vary in length of time required for curing, insufficient curing may result in bleeding. New concrete tends to chalk; alkyd may also react with the alkali in new concrete making adhesion difficult. Regardless of surface condition, a test stripe should be placed inconspicuously to determine if surface is suitable before continuing.

Application

Formulated for use with either airless or conventional air atomized spray equipment. See equipment manufacturer’s recommendations. Recommended paint thickness is 15 mils wet. For best results apply when air and surface temperature are above 40° F and relative humidity is below 85%.
THINNING & CLEANING: Federal and state regulations prohibit dilution of this product. DO NOT THIN. Toluene may be used for cleaning.

Shelf Life

Six (6) months minimum based on unopened container stored @ 77º F out of direct sunlight indoors. It is recommended to order only what you are able to use in this time frame.

Storage

Store in a cool dry area above 35° F, inside, and out of direct sunlight.

Current Stock Colors

White, Yellow, Green, Blue, Black, Red

Call for pricing or request information.

Athletic Field Marking Marking Paint

Winning Streak™ and Premium Athletic Field Marking Paint

Winning Streak™ is specifically formulated for use on grass athletic playing fields for sports such as football, soccer, field hockey, lacrosse, etc., can be used on synthetic turf where durability is not required. Winning Streak™ is supplied in a liquid paste ready for dilution with water.

Mixing

Mix to the ideal ratio of 1 part water to 1 part paint. (Never exceed 3 parts water to 1 part paint). Regardless of mix ratio, product must be stirred to a smooth uniform consistency.

Application

Air and surface temperature should be above freezing. Dry surface is ideal, but it may be applied to a slightly damp surface (longer dry time). Spraying is the preferred method of application to achieve clean sharp lines. Most conventional line marking machines will perform well. As with any paint to be sprayed, straining is highly recommended (latex skins do not re-dissolve when mixed).

Clean Up

Water is usually sufficient on a daily basis. For a more thorough cleaning, soap and warm water is recommended.

Shelf Life

Twelve (12) months minimum in an unopened container stored @ 77ºF.

Storage

Store in a cool dry area. KEEP FROM FREEZING.

Current Stock Colors

Ultra White, Premium White, White, Yellow, Red, Blue, Black, Orange

PictureSynthetic Field Marking Paint

Temporary to permanent Synthetic Turf Paint, specifically formulated for use on synthetic athletic playing fields for sports such as football, soccer, field hockey, lacrosse, etc. supplied ready to use, no dilution required.

Application

Air and surface temperature should be above 50°F with a maximum relative humidity of 85%. Spraying is the preferred method of application to achieve clean sharp lines. Most conventional line marking machines will perform well. As with any paint to be sprayed straining is highly recommended (latex skins do not re-dissolve when mixed).

Thinning & Cleaning

If thinning of paint is desired, never exceed 1 quart of water per 5 gallons of paint, regardless of whether or not paint is thinned, stir to a smooth uniform consistency. For clean up water is usually sufficient on a daily basis. For a thorough cleaning, soap and warm water is recommended.

Shelf Life

Twelve (12) months minimum based on unopened container stored @ 77ºF.

Storage

Store in a cool dry area. KEEP FROM FREEZING.

Half Time Stir & Spray

Grass Athletic Field Ready to Use Paint

Half Time is specifically formulated for use on grass athletic playing fields for sports such as football, soccer, field hockey, lacrosse, etc. Half time is supplied ready to use, no dilution required.

Application

Air and surface temperature should be above freezing. Dry surface is ideal, but it may be applied to a slightly damp surface (longer dry time). Spraying is the preferred method of application to achieve clean sharp lines. Most conventional line marking machines will perform well. As with any paint to be sprayed straining is highly recommended (latex skins do not re-dissolve when mixed).

Thinning & Cleaning

If thinning of paint is desired, never exceed 1 quart of water per 5 gallons of paint. Regardless of whether or not paint is thinned, stir to a smooth uniform consistency. For clean up water is usually sufficient on a daily basis. For a thorough cleaning, soap and warm water is recommended.
Shelf Life
Twelve (12) months minimum based on unopened container stored @ 77ºF.

Storage

Store in a cool dry area. KEEP FROM FREEZING.

Current Stock Colors
White, Yellow, Blue, Red, Black, Orange

Aerosol Athletic Field Marking Paint

Krylon® Aerosol Athletic Field Marking Paint

Aerosol cans are available for minor applications – parking lots, school grounds, utility ground marking, surveying, athletic fields, warehouse aisles, communication lines, etc. – where heavy traffic or safety concerns demand long lasting durable, clearly marked surfaces. Available in an array of colors – Utility White, Hi-Vis Yellow, Fluorescent Orange, Green – among a few, marking aerosol paints can be either solvent or water based. These inverted marking paints (and chalks) have a fast-drying formula which penetrates and adheres to hot, cold or wet surfaces. They are VOC and MIR compliant as well as free of lead hazards. One standard case of aerosol paint contains twelve 17 oz. cans.

Stencils

Form Flex Stencils

Cut from heavyweight (1/8″ thick) poly-vinyl, these stencils are more durable than plywood stencils, yet are lighter, easier to transport and resist warping. Dried paint flakes away from the vinyl surface, making cleanup very easy. Standard letter and number sizes are 4″, 6″, 8″, 10″, 12″, 18″, 24″, 36″, 48″, 72″and 96″. 96″ letters and numbers come in both 4″ and 6″ strokes. Other symbols include straight and curved arrows, railroad crossing symbols, stop bars, fire hydrants, bike and ped xings, bike lane symbols, handicap symbols, sport kits, standard legends in different sizes (NO, PARKING, FIRE, LANE, etc.) – please inquire. Custom-made stencils are also available.

Save